Carpets N More

Protecting your new carpet shouldn’t be a chore. Just a few practices can keep your carpet looking good. First, review the carpet manufacturer’s warranty for their requirements. Some manufacturers now require periodic professional steam extraction to keep their warranty in force.

Entryways, according to studies, are the primary source of soil entering your home. Since about 80% of soil arrives on your floor in the first 4-6 steps from outside, good walkoff mats and entry rugs will significantly reduce the amount of soil making it onto your floors.

Vacuuming regularly—daily in traffic areas—is the next best thing you can do to protect your carpet. Dirt particles have sharp edges that can gash and abrade carpet fibers, leading to a crushed and matted look. A good vacuum with strong suction and beater bars will remove most of these particles. If your vacuum has bags, change them often.

Every 12-24 months, have your carpets professionally hot water extracted. The home models generally don’t have enough power, heat or suction to adequately clean and remove the dirty water and cleaning solution.

Address spills and spots immediately! Blot water-based spills from the outside to the center, using a clean, white, absorbent cloth. Use a neutral pH cleaner and rinse afterward to remove any residues. Dry well and vacuum before walking on the spot.

For oil-based spills/stains, cover the spot completely with cornstarch, baking soda or baby powder and allow it to sit overnight. Vacuum in the morning. If you can still see the stain, repeat this process, then follow the procedure above for water-based stains.

Two questions have to be asked before you clean your carpets. The first is whether to use steam or dry cleaning? The second is whether you do it yourself?

When it is done properly, steam cleaning is likely the best choice—and the one most often recommended by carpet manufacturers. “Done properly” means that the water is hot enough, the technician is appropriately trained (best if he’s IICRC Certified), the cleaning products are right for your carpet and the cleaning equipment is in good working order, especially the vacuum. When a truck-mounted vacuum works correctly, it will retrieve up to 95% of the moisture used in cleaning your carpet. This dramatically increases the effectiveness of the cleaning and reduces drying time for the carpet.

It is best not to try steam cleaning on your own. The great majority of tools available for rent or purchase for home use don’t generate enough heat for the water or power to retrieve what water they spray into your carpet. They often work well for spot-cleaning, but for a true deep extraction cleaning, it is best to utilize an experienced professional who operates a truck-mounted steam unit. Remember that for steam to reach your carpet, the water temp has to start at about 250 degrees!

It is also critical that all the cleaning agents are rinsed and removed, and that your carpet isn’t over-wetted. Overwetting can cause wrinkles or backing separation; cleaner residues left in your carpet will accelerate future soiling!

Reader Question:

Help! My massage therapist is about to head to the grocery store to buy all of the carpet cleaners she can in order to attempt to remove a massage oil mishap on our carpet! What should we do? Our carpet is really nice (and new) and I don’t want to ruin it!

- Thanks, Dr. Allie from Denver , CO

Answer:

Dear Allie,

Stop that therapist! Don’t let her run out the door yet and waste your money or her time! Below is how you should treat this stain. First, the most important thing is to NOT use multiple cleaners on top of each other when you don’t like the result of the first one. This can cause a reaction and permanently damage your carpet. Second, if you try anything other than the detergent option, test first in a closet for colorfastness. Use a white rag only. Third, remember more is not always better. Drowning a stain can only dilute it and make it spread.

Here’s your answer:

Nail Polish Remover – Two types of nail polish removers are available. One type contains acetone, a dry cleaning solvent. Use the same precautions as with other dry cleaning solutions. The second type contains amyl acetate, which is used in many paint, oil, and grease (POG) removers. Many POG removers leave residues that may cause rapid soiling. When using a POG remover, always rinse the area thoroughly with a dry solvent. (See Residue Precautions.)

Solvent – A non-flammable spot removal solution, or dry cleaning type solvent, is preferred. Exercise caution when using a solvent. Never pour it directly onto the carpet or allow it to reach the backing, because it can damage the latex that holds the primary and secondary backings together. Acceptable solvents include Carbona®, Energine®, K2R®, Goof-Off®, etc.

Detergent Solution – Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues. (See Residue Precautions.) Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (fluorescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.

Warm Water – Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.

Ammonia Solution – Mix one (1) tablespoon of household ammonia per cup of water. Please note: Be aware that ammonia, if used improperly, can cause a color change. Be sure to test a hidden area.

http://www.carpetsnmorecolorado.com/contentpage.aspx?Id=16797#Oil,%20Lubricating

For more stain solving tips, click here.

Thanks for doing the right thing and asking an expert first!

We have touted wool carpets as being among the most luxurious options you have for carpet in your home. When you’ve spent more money on wool, you want to maintain it correctly! The single most effective method of maintenance on wool carpet is regular vacuuming.

One of the most common issues with wool carpet is a red wine spill. Have you heard it said that if you want to treat a red wine spill on wool carpet, you pour some white wine on it? Don’t do it! Not only will it be a waste of some good white wine, it will simply spread your problem!

The best way to treat a wine spill (or any water-based staining agent) is to immediately soak up as much of the spill as possible with an absorbent cloth or paper. Start at the outer edges of the spill and work your way to the center, blotting rather than rubbing. This is important! Blot, don’t rub! If you can still see the spot after blotting, use a spot remover specifically designed for water-based stains on wool, like any spot removers that carry a WoolSafe® label. In particular, do not use regular detergents, as they will likely leave a residue that will cause soiling quickly at the spot of the stain.

For oily stains, don’t be afraid to use a dry cleaning solvent (again, best with a WoolSafe® label). Remember that most high-quality wool garments recommend dry cleaning! Just be sure that you use the solvent sparingly as it can damage the backing of your carpet.

Sorry guys, this one is for the ladies. (Although Adam Lambert from American Idol may have changed all of that!) Have you ever been in a hurry and dropped your mascara on your carpet? Don’t worry, we’ve got the solution. Take a look at these simple steps and you’ll be able to tackle that stain with no problem.

Here’s all you have to do! Follow these simple guidelines:

Solvent – A non-flammable spot removal solution, or dry cleaning type solvent, is preferred. Exercise caution when using a solvent. Never pour it directly onto the carpet or allow it to reach the backing, because it can damage the latex that holds the primary and secondary backings together. Acceptable solvents include Carbona®, Energine®, K2R®, Goof-Off®, etc.

Detergent Solution – Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues. (See Residue Precautions.) Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (flourescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.

Warm Water – Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.

Call a Professional – Professional cleaners have the ability and the equipment to use more aggressive cleaning solutions to remove stubborn spills. Always consider consulting a professional cleaner regarding any spot removal question. The Carpet and Rug Institute is a great resource- 1-800-882-8846.

Today’s post is wrapping up what you need to know about luxury vinyl tile (LVT). If you missed our other posts on LVT, be sure to check them out here.

Here’s what you need to know after installation of LVT:

Depending on the manufacturer these guidelines may vary:

After installation, furniture and foot traffic should not be on the floor for at least 24 hours. This allows the adhesive to dry completely.

After installation, the floors should also not be washed for 48 hours.

The adhesive residue on the floors after installation can be removed with mineral spirits.

Floor covering subjected to excessive heat and light exposure is subject to

thermal degradation. Use appropriate precautions to minimize potential

affects on the floor covering.

Oil or petroleum based products can result in surface staining. Do not track

asphalt driveway sealer or automobile oil drips onto the vinyl floor covering.

During the life of the floor, the temperature should never drop below 55°F.

Care and Maintenance

Floors should never be flooded with water or be allowed to have standing water. This can loosen the adhesive.

Care should be taken with heavy furniture and appliances. Furniture protectors should be used that are at least 2” in diameter. The hard and small buttons sometimes found on the bottom of chairs and other pieces of furniture should be removed. High heeled shoes also apply here.

Protect the floors from dirt and grit that can be tracked in by using walk off mats at every entrance.

Do not use rubber backed mats. Certain rubber compounds can permanently stain vinyl.

Never use vinegar, acetone or lacquer thinner to clean these floors.

For extreme staining like nail polish , paint, dye and permanent markers try applying fingernail polish remover that contains acetone, but is not pure acetone with a soft cloth and gently rub.

Spills should be removed immediately.

The floor should be swept, dust mopped or vacuumed on a regular basis.

Stubborn rubber heel marks can be removed with a soft cloth dampened with mineral spirits.

When the floor gets build up, consult the with the manufacturer’s recommended cleaner system to see if a stripper is available.

It’s almost Easter! If you love to dye Easter eggs, but hate the worry of wondering what to do if you spill the dye on the carpet, stop worrying! Below are simple and easy guidelines to follow if you have a spill with Easter egg dye. You always want to treat spills as soon as possible and follow the instructions closely.

Detergent Solution – Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues.  Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (flourescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.

Warm Water – Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.

Ammonia Solution – Mix one (1) tablespoon of household ammonia per cup of water. Please note: Be aware that ammonia, if used improperly, can cause a color change. Be sure to test a hidden area.

Not sure? Call a Professional – Professional cleaners have the ability and the equipment to use more aggressive cleaning solutions to remove stubborn spills. Always consider consulting a professional cleaner regarding any spot removal question. Carpet and Rug Institute – 1-800-882-8846.

It’s almost Valentines Day! Don’t let your special day be ruined with a chocolate stain! (or for Peet’s sake don’t decide not to give chocolate for Valentine’s Day because you are afraid of a chocolate stain.) If things get a little messy, don’t worry – we’ve got easy steps for you to follow below.

Easy instructions for how to remove chocolate stains:

Detergent Solution – Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues. (See Residue Precautions.) Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (flourescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.

Vinegar Solution – Mix one (1) cup of white vinegar per two (2) cups of water. White vinegar is a 5% acetic acid solution. It is used most often to lower the alkalinity caused by detergent solutions or alkaline spills.

Warm Water – Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.

Ammonia Solution – Mix one (1) tablespoon of household ammonia per cup of water. Please note: Be aware that ammonia, if used improperly, can cause a color change. Be sure to test a hidden area.

Solvent – A non-flammable spot removal solution, or dry cleaning type solvent, is preferred. Exercise caution when using a solvent. Never pour it directly onto the carpet or allow it to reach the backing, because it can damage the latex that holds the primary and secondary backings together. Acceptable solvents include Carbona®, Energine®, K2R®, Goof-Off®, etc.

Not sure? Call a Professional – Professional cleaners have the ability and the equipment to use more aggressive cleaning solutions to remove stubborn spills. Always consider consulting a professional cleaner regarding any spot removal question. CRI – 1-800-882-8846.

Happy Valentines Day!