Saxony carpets are generally used in formal areas which require a sober, and solemn appearance, such as office, or a study room. This is also because they are moderately durable and are not suitable for handling very high foot traffic. Saxony carpets have a tendency to show foot prints on them; although it has been rectified in some of the latest Saxony carpets to come out, which makes it easy to maintain and clean.

While buying a Saxony carpet, take care to notice that there are various types of weaves available, so choose which best suits your needs. The extra softness they offer is useful for home which has toddlers; but before buying, you should check whether the product is non-allergenic or not. The lush, beautiful finish of Saxony carpets makes them one of the most desirable carpets out there. Although slightly expensive, they more than make up for it by providing you with an unprecedented comfort. A Saxony carpet can set the tone of your room. If comfort and extra softness are your priorities, then go get a Saxony carpet for your home and enjoy its sumptuousness for years to come.

The classic elements such as the design of all the furniture, the moldings and most of the accessories contrast with the contemporary approach to color and design.

Painting the walls this dark green grey provides the first leap from the standard. The fabric choice for the loveseats and drapes also depart from a traditional approach.

The carpet, while traditional in color, departs with its willingness to include pattern. Both the base pattern of the carpet and the overlay of a matching rug with a contrasting border take this room up a design notch. Both the colors and the carpet choices make this room stand out as a fresh take on an old look.

This room shows the power of contrast in design. Taking a chance on a dark wall tone, combining different patterns, and encouraging both very light and very dark elements to interact makes for an exciting room.

Does your home show your more daring side? How about challenging yourself to take some chances with your décor? Even if your taste is traditional, let your creative side experiment. You never know what may happen!

Bill Bryson, the author of a number of books including the best-selling A Walk in the Woods, recently wrote a book about the origins of everyday aspects of our homes, called At Home, and in it, he talks about the origins of flooring.

When people first started building homes, the focus was on protection from the elements rather than comfort. Flooring reflected that. You would find dirt floors in almost every home in the 1600’s, and in rural England and other parts of Europe, dirt floors were common until the early 20^th century.

To provide some protection from the cold and dust, the wealthier households spread rushes over the dirt, with a new layer about twice a year. Unfortunately, they often didn’t remove the old rushes, which left plenty of space for insects and even mice and rats.

Once wood and tile floors became more common, carpets began to appear. However, these were so valuable that they were almost never laid on the floor to be walked on; rather, people hung them on the walls or placed them over tables. Because of transportation costs and limitations, the wood, tile or stone used for homes and floors was all local. This is one of the reasons why in England, most floors, moldings, and furniture were made of oak.

Today, instead of cutting rushes when you want new flooring, you can visit our showroom and choose carpeting, tile and wood from around the world. Rather than having carpets too valuable to walk on, you can warm your feet on them in every room in your home. We’re happy to have a hand in making flooring a source of pleasure and style rather than just the basic protective covering it once was.

This interesting article was found on Talkfloor.com. Thought you might enjoy it!

Mathematician-philosopher Alfred North Whitehead once said, “It requires a very unusual mind to undertake the analysis of the obvious.” This certainly rings true with Chris Maluszynski’s Las Vegas Carpets series, whose name explains it all. The photos draw out the psychology of Las Vegas through the simple observation of carpet.

Years ago, while in Las Vegas covering the World Series of Poker, Maluszynski found himself as enraptured by the drama unfolding below the tables as above them. Originally from Sweden, now based in New York, Maluszynski spent four years roaming Sin City’s kaleidoscopic corridors with his camera.

“The carpets definitely play a big part in keeping the town as surreal as it is,” said Maluszynski by e-mail. “Thought has been given to the carpeting by people who want to create this special atmosphere, [one] that defines Vegas as a gambling city.”

That’s a theory backed up by Dave Schwartz, Director of the Center for Gaming Research, at the University of Nevada Las Vegas. Schwartz theorizes that “casino carpet is known as an exercise in deliberate bad taste that somehow encourages people to gamble.”

Schwartz also points out that the busy carpets are not without design: There are floral designs at Mandalay Palace, abstract pointillist floors at Paris and, at Caesars Palace, the wheel – the Roman symbol of the “relentless capriciousness of fortune.”

As he trod the psychedelic multilevel-loop carpets of Vegas, Masulynzski’s thoughts flashed back to the Vegas experienced and described by Hunter S. Thompson: “You’re in a prison of sensory impressions. I was trying to rest my eyes, and I looked at the carpet and thought, Shit, I can’t do it there, either,” Maluszynski recently told The New Yorker.

Vegas isn’t all obvious ornament however; Maluszynski did manage to find refuge, “There is actually a surprising number of galleries in Vegas where great art can be found. Wynn’s art collection is impressive.”

Maluszynski exhibited Las Vegas Carpets in April and has no intentions to return to the series. However, he continues to explore his interest in, and expand his collection of “odd patterns that define particular places.” Maluszynski plans to point his lens at another smothering of American kitsch: “I have started shooting motel bedspreads; it’s a great excuse to go road-tripping.”

All Images @Chris Maluszynski/MOMENT.

Chris Maluszynski is represented by Moment Agency. Pete Brook writes regularly about visual cultures at Prison Photography.
Read More here.

There are some significant benefits to olefin besides its incredibly low price. One main advantage is the colorfast, fade-resistant quality of the fiber. Because color is introduced while the material is still in a liquid state, prior to extrusion into fiber, it can easily withstand direct sunlight or exposure to strong agents like chlorine bleach. Other qualities of olefin are that it is both static and mold resistant, making it a good candidate for recreation rooms, screened-in patios or even basements.

Nonetheless, olefin does also bring some challenges. It is highly susceptible to staining from oil-based materials, which is why you should never attempt to utilize a solvent-based stain protection product. Also, olefin has a low melting point, allowing for the fiber to actually melt and leave permanent damage from friction caused by something heavy being dragged over the face of the carpet. Finally, olefin fibers will crush and mat in areas of high traffic.

Entryways, according to studies, are the primary source of soil entering your home. Since about 80% of soil arrives on your floor in the first 4-6 steps from outside, good walkoff mats and entry rugs will significantly reduce the amount of soil making it onto your floors.

Vacuuming regularly—daily in traffic areas—is the next best thing you can do to protect your carpet. Dirt particles have sharp edges that can gash and abrade carpet fibers, leading to a crushed and matted look. A good vacuum with strong suction and beater bars will remove most of these particles. If your vacuum has bags, change them often.

Every 12-24 months, have your carpets professionally hot water extracted. The home models generally don’t have enough power, heat or suction to adequately clean and remove the dirty water and cleaning solution.

Address spills and spots immediately! Blot water-based spills from the outside to the center, using a clean, white, absorbent cloth. Use a neutral pH cleaner and rinse afterward to remove any residues. Dry well and vacuum before walking on the spot.

For oil-based spills/stains, cover the spot completely with cornstarch, baking soda or baby powder and allow it to sit overnight. Vacuum in the morning. If you can still see the stain, repeat this process, then follow the procedure above for water-based stains.

When it is done properly, steam cleaning is likely the best choice—and the one most often recommended by carpet manufacturers. “Done properly” means that the water is hot enough, the technician is appropriately trained (best if he’s IICRC Certified), the cleaning products are right for your carpet and the cleaning equipment is in good working order, especially the vacuum. When a truck-mounted vacuum works correctly, it will retrieve up to 95% of the moisture used in cleaning your carpet. This dramatically increases the effectiveness of the cleaning and reduces drying time for the carpet.

It is best not to try steam cleaning on your own. The great majority of tools available for rent or purchase for home use don’t generate enough heat for the water or power to retrieve what water they spray into your carpet. They often work well for spot-cleaning, but for a true deep extraction cleaning, it is best to utilize an experienced professional who operates a truck-mounted steam unit. Remember that for steam to reach your carpet, the water temp has to start at about 250 degrees!

It is also critical that all the cleaning agents are rinsed and removed, and that your carpet isn’t over-wetted. Overwetting can cause wrinkles or backing separation; cleaner residues left in your carpet will accelerate future soiling!

Help! My massage therapist is about to head to the grocery store to buy all of the carpet cleaners she can in order to attempt to remove a massage oil mishap on our carpet! What should we do? Our carpet is really nice (and new) and I don’t want to ruin it!

- Thanks, Dr. Allie from Denver , CO

Answer:

Dear Allie,

Stop that therapist! Don’t let her run out the door yet and waste your money or her time! Below is how you should treat this stain. First, the most important thing is to NOT use multiple cleaners on top of each other when you don’t like the result of the first one. This can cause a reaction and permanently damage your carpet. Second, if you try anything other than the detergent option, test first in a closet for colorfastness. Use a white rag only. Third, remember more is not always better. Drowning a stain can only dilute it and make it spread.

Here’s your answer:

Nail Polish Remover – Two types of nail polish removers are available. One type contains acetone, a dry cleaning solvent. Use the same precautions as with other dry cleaning solutions. The second type contains amyl acetate, which is used in many paint, oil, and grease (POG) removers. Many POG removers leave residues that may cause rapid soiling. When using a POG remover, always rinse the area thoroughly with a dry solvent. (See Residue Precautions.)

Solvent – A non-flammable spot removal solution, or dry cleaning type solvent, is preferred. Exercise caution when using a solvent. Never pour it directly onto the carpet or allow it to reach the backing, because it can damage the latex that holds the primary and secondary backings together. Acceptable solvents include Carbona®, Energine®, K2R®, Goof-Off®, etc.

Detergent Solution – Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues. (See Residue Precautions.) Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (fluorescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.

Warm Water – Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.

Ammonia Solution – Mix one (1) tablespoon of household ammonia per cup of water. Please note: Be aware that ammonia, if used improperly, can cause a color change. Be sure to test a hidden area.

http://www.carpetsnmorecolorado.com/contentpage.aspx?Id=16797#Oil,%20Lubricating

For more stain solving tips, click here.

Thanks for doing the right thing and asking an expert first!

One of the most common issues with wool carpet is a red wine spill. Have you heard it said that if you want to treat a red wine spill on wool carpet, you pour some white wine on it? Don’t do it! Not only will it be a waste of some good white wine, it will simply spread your problem!

The best way to treat a wine spill (or any water-based staining agent) is to immediately soak up as much of the spill as possible with an absorbent cloth or paper. Start at the outer edges of the spill and work your way to the center, blotting rather than rubbing. This is important! Blot, don’t rub! If you can still see the spot after blotting, use a spot remover specifically designed for water-based stains on wool, like any spot removers that carry a WoolSafe® label. In particular, do not use regular detergents, as they will likely leave a residue that will cause soiling quickly at the spot of the stain.

For oily stains, don’t be afraid to use a dry cleaning solvent (again, best with a WoolSafe® label). Remember that most high-quality wool garments recommend dry cleaning! Just be sure that you use the solvent sparingly as it can damage the backing of your carpet.

When you say, “polyester,” do you mean just plain polyester, PET polyester or PTT polyester? There is lots of confusion about what the terms really mean. Recently, most of the polyester fibers used for carpet construction have been of the PET variety. PET polyester is manufactured primarily from used plastic soda bottles. It is an improved fiber over the original polyester, but still retains some of the performance issues, about which you may have heard stories.

The high points of PET carpets are that they are inexpensive, and the fiber is highly colorfast and resistant to water-based stains (though susceptible to oil-based stains).  Additionally, there is a particularly soft and lush feel (carpet folks call it good “hand”) to new polyester carpet. The main complaints about carpets made from this fiber are that they crush and mat quickly, and that oil-based stains are difficult – if not impossible to remove.

PTT polyester is a late generation fiber refined and introduced by DuPont in 2000, under the trade name Sorona. It has some interesting characteristics, like 37% renewable resource content (corn-based) and reported extra stain and performance capabilities over earlier generations of polyester. Because of its unique performance characteristics in carpet construction, the FTC (in March, 2009) authorized the new generic fiber name and classification, Triexta. Mohawk’s Smartstrand carpets are manufactured from this fiber.

According to DuPont and Mohawk, carpets constructed from triexta fibers will perform every bit as well as nylon – and yet retain the soft feel (the hand) and stain-resistance of polyester.